toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Timing Belt Removal|Page 1083 > < Timing Belt Removal|Page 1081
Page 3
background image

4. Remove Power Steering (PS) pump drive belt.

Loosen the pivot bolt and adjusting bolt, and remove the drive belt.

5. Slightly jack up engine.

Raise the engine enough to remove the weight from the engine mounting on the right side.

6. Disconnect ground strap connector.
7. Remove RH engine mounting insulator.

(a)

Remove the bolt and 2 nuts holding the mounting insulator to the mounting bracket.

(b) Disconnect the PS reservoir from the reservoir bracket.

(c)

Remove the bolt, nut and PS reservoir bracket.

Timing Belt Removal|Page 1083 > < Timing Belt Removal|Page 1081