toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Component Tests and General Diagnostics|Page 3253 > < Component Tests and General Diagnostics|Page 3251
Page 4
background image

(k) Disconnect the fuel return hose from the return pipe, and remove the delivery pipes.
(l) California:

Remove the 2 O-rings, insulator and grommet from each injector.

(m)Except California:

Remove the O-ring and grommet from each injector.

INJECTORS INSTALLATION 

1. INSTALL INJECTORS AND DELIVERY PIPE

(a) California:

Install new insulator and grommet to each injector.

(b) Except California:

Install a new grommet to each injector.

(c) California:

Apply a light coat of gasoline onto 2 new O-rings, and install them to each injector.

(d) Except California:

Apply a light coat of gasoline onto a new O-ring. and install it to each injector.

(e) Place the delivery pipe between the intake manifold and cylinder head.

(f) Connect the fuel return hose to the return pipe.

Component Tests and General Diagnostics|Page 3253 > < Component Tests and General Diagnostics|Page 3251