Celica GT Convertible L4-2164cc 2.2L DOHC MFI (1997)
Differential: Service and Repair
Disassembly
NOTE: For removal and installation procedures refer to "Manual Transmission/Transaxle, Service and Repair."
DIFFERENTIAL CASE DISASSEMBLY
1. Remove side bearing from differential case (vehicle speed sensor drive gear side).
a. Using SST, remove the bearing from the drive gear side of the case.
SST 09950-00020, 09950-00030
b. Remove the vehicle speed sensor drive gear.
2. Remove ring gear.
a. Place matchmarks on the ring gear and case.
b. Remove the 8 bolts.
c. Using a copper hammer, tap on the ring gear to remove it from the case.
3. Remove side bearing from differential case (ring gear side).
