Celica GT Convertible L4-2164cc 2.2L DOHC MFI (1997)
a. Check the input shaft for wear or damage.
b. Using a micrometer, measure the outer diameter of the input shaft journal surface.
-
Minimum outer diameter:
Part A: 26.970 mm (1.0618 inch).
Part B: 32.470 mm (1.2783 inch).
Part C: 33.090 mm (1.3028 inch).
Part D: 29.970 mm (1.1799 inch).
If the outer diameter is less than the minimum, replace the input shaft.
c. Using a dial indicator, check the shaft runout.
-
Maximum runout: 0.05 mm (0.0020 inch).
If the runout exceeds the maximum, replace the input shaft.