Celica GT Convertible L4-2164cc 2.2L DOHC MFI (1997)
Input Shaft: Service and Repair
Input Shaft Assembly
INPUT SHAFT ASSEMBLY
HINT: Coat all of the sliding and rotating surfaces with gear oil before assembly.
1. Install No.2 clutch hub into hub sleeve.
a. Install the clutch hub and shifting keys to the hub sleeve.
b. Install the shifting key springs under the shifting keys.
NOTICE: Install the key springs positioned so that their end gaps are not line.
2. Install 3rd gear, needle roller bearing, synchronizer ring and No.2 hub sleeve assembly to input shaft.
a. Apply gear oil to the needle roller bearings.
b. Place the synchronizer ring (for 3rd gear) on the gear and align the ring slots with the shifting keys.
NOTICE: Do not install the synchronizer ring for 4th gear.
c. Using a press, install the 3rd gear and No.2 hub sleeve.
3. Install snap ring.