Celica GT Liftback L4-2164cc 2.2L DOHC (5S-FE) MFI (1999)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
REMOVAL
1. DISCONNECT BRAKE LINES
Using SST, disconnect the brake lines from the ABS actuator.
SST 09023-00100
Torque: 15 Nm (155 kgf-cm, 11 ft. lbs.)
2. DISCONNECT 2 CONNECTORS
3. REMOVE ABS ACTUATOR
a. Remove the 2 bolts, nuts and ABS actuator assembly.
Torque: 19 Nm (195 kgf-cm, 14 ft. lbs.)
b. Remove the 3 nuts and ABS actuator from the actuator bracket assembly.
Torque: 7.8 Nm (80 kgf-cm, 69 inch lbs.)
c. Remove the 3 cushions and holders from the ABS actuator.
INSTALLATION
Installation is in the reverse order of removal.
1. AFTER INSTALLATION, FILL BRAKE RESERVOIR WITH BRAKE FLUID AND BLEED BRAKE SYSTEM
2. CHECK FOR LEAKS