Celica GT Liftback L4-2164cc 2.2L DOHC (5S-FE) MFI (1999)
_mfi/Page-1591001.png)
Cruise Control Actuator Cable: Testing and Inspection
Actuator Control Cable Inspection
CHECK:
1. Check that the actuator and control cable throttle link are properly installed and that the cable and link are connected correctly.
2. Check that the actuator and bell crank are operating smoothly.
3. Check that the cable is not loose or too tight.
OK:
Freeplay: less than 10 mm
HINT: If the control cable is very loose, the vehicle's loss of speed going uphill will be large. If the control cable is too tight, the idle RPM will become
high.
