Celica GT Liftback L4-2164cc 2.2L DOHC (5S-FE) MFI (1999)
Drive Belt: Service and Repair
REMOVAL
REMOVE DRIVE BELT
a. Loosen the pivot bolt.
b. Loosen the adjusting lock bolt.
c. Loosen the adjusting bolt.
d. Remove the drive belt.
INSTALLATION
INSTALL DRIVE BELT
a. Install the drive belt.
b. Using a adjusting bolt, adjust drive belt tension.
New belt: 175 ± 5 lbf
Used belt: 110 ± 22 lbf
c. Tighten the adjusting lock bolt.
Torque: 19 Nm (185 kgf.cm, 14 ft.lbf)
d. Tighten the pivot bolt.
Torque: 54 Nm (530 kgf.cm, 40 ft.lbf)