Celica GT Liftback L4-2164cc 2.2L DOHC (5S-FE) MFI (1999)
2. REMOVE BLOWER UNIT
a. Disconnect the connector from the blower motor and air inlet servomotor.
b. Remove wire harness clamp.
c. Remove the 2 nuts, a bolt and the blower unit.
INSTALLATION
Installation is in the reverse order of removal.
Disassembly and Reassembly
DISASSEMBLY
1. REMOVE AIR INLET DAMPER CONTROL SERVOMOTOR
Remove the 2 screws and the air inlet damper control servomotor.
2. REMOVE BLOWER MOTOR
a. Remove the screw and wire harness clamp.
b. Remove the 3 screws and the blower motor.
REASSEMBLY
Reassembly is in the reverse order of disassembly.