Celica GT Liftback L4-2164cc 2.2L DOHC (5S-FE) MFI (1999)
_mfi/Page-1390002.png)
b. Connect the positive (+) lead from the battery through a 1.4 W test bulb, to each terminal, as shown in the chart.
c. Push in the each of the button and then check that the indicators and test bulb light up.
If operation is not as specified, replace the A/C control assembly.
3. INSPECT AIR INLET SWITCH
a. Connect the positive (+) lead from the battery to terminal A - 19 and the negative (-) lead to terminal A - 22.
b. Connect the positive (+) lead from the battery through a 1.4 S test bulb to each terminal, as shown in the chart.
c. Check that the FRESH, RECIRC indicator and test bulb light up alternately each time the air inlet control switch is pressed.
If operation is not as specified, replace the A/C control assembly.
4. INSPECT INDICATOR DIMMING OPERATION
a. Connect the positive (+) lead from the battery to terminal A - 19 and the negative (-) lead to terminal A - 21 and A-22.
b. Connect the positive (+) lead from the battery to terminal A - 8 and check that the node indicator dims.
If operation is not as specified, replace the A/C control assembly.
5. INSPECT DEF AND A/C SWITCH OPERATION
