toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Fuel Pressure Release > < Pressure Specification|Page 3009
Page 2
background image

If pressure is not as specified, check the fuel pump, pressure regulator and/or injectors.

p. After checking fuel pressure, disconnect the negative (-) terminal cable from the battery and carefully remove the SST and fuel tube connector to

prevent gasoline from splashing.

SST 09268-45012

q. Reconnect the fuel inlet hose with 2 new gaskets and the union bolt.

Torque: 29 Nm (300 kgf.cm, 21 ft.lbf)

r.

Reconnect the negative (-) terminal cable to the battery.

s. Check for fuel leakage.

Fuel Pressure Release > < Pressure Specification|Page 3009