Celica GT Liftback L4-2164cc 2.2L DOHC (5S-FE) MFI (1999)
_mfi/Page-898003.png)
2. SET NO.1 CYLINDER TO TDC/COMPRESSION
Turn the crankshaft clockwise, and position the slit of the intake camshaft as shown in the illustration
3. INSTALL DISTRIBUTOR
a. Install a new O-ring to the distributor housing.
b. Apply a light coat of engine oil on the O-ring.
c. Align the cutout portion of the coupling with the groove of the housing.
d. Insert the distributor, aligning the bolt holes of the distributor flange and cylinder head.
e. Tighten the bolt.
Torque: 19 Nm (195 kgf.cm, 14 ft.lbf)
4. CONNECT HIGH-TENSION CORDS TO SPARK PLUGS AND IGNITION COIL
a. Connect the 5 high-tension cords to the spark plugs and ignition coil.
Firing order: 1-3-4-2
b. Install the 4 high-tension cords to the cord clamps on the cylinder head cover.
5. CONNECT DISTRIBUTOR CONNECTOR
