toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 6049 > < Diagram Information and Instructions|Page 6047
Page 4
background image

GROUND and the seat belt warning buzzer sounds for approx. 4-8 seconds. However, if the seat belt is put on during this period (While the
buzzer is sounding), signal input to TERMINAL 8 of the relay stops and the current flowing from TERMINAL 7 of the relay to TERMINAL 10
to GROUND is cut, causing the buzzer to stop.

2. KEY REMINDER SYSTEM

With the ignition key inserted in the ignition key cylinder (Unlock SW ON), the ignition SW still OFF and the driver's door open (Door courtesy
SW ON), when a signal is input to TERMINAL 6 of the relay, the integration relay operates, current flows from TERMINAL 7 of the relay to 
TERMINAL 10 to GROUND and the key reminder buzzer sounds.

Parts Location

Parts Location

Position Of Parts In Instrument Panel (Part 1 Of 2) (Fig 30)

Diagram Information and Instructions|Page 6049 > < Diagram Information and Instructions|Page 6047