Celica GT Liftback L4-2164cc 2.2L DOHC MFI (1998)
Vehicle Speed Sensor: Testing and Inspection
INSPECT VEHICLE SPEED SENSOR OPERATION
a. Connect the positive (+) lead from battery to terminal 1 and negative (-) lead to terminal 2
b. Connect the positive (+) lead from tester to terminal 3 and negative (-) lead to terminal 2
c. Rotate shaft.
d. Check that there is voltage change from approx. 0 V to 11 V or more between terminals 2 and 3
HINT: The voltage change should be 4 times for every revolution of the speed sensor shaft.
If operation is not as specified, replace the sensor.