Celica GT Liftback L4-2164cc 2.2L DOHC MFI (1998)
(k) Temporarily install the 2 bolts holding the delivery pipe to the cylinder head.
(l) Check that the injectors rotate smoothly.
HINT: If injectors do not rotate smoothly, the probable cause is incorrect installation of O-rings. Replace the O-rings.
(m)Position the injector connector upward.
(n) Tighten the 2 bolts holding the delivery pipe to the cylinder head.
Torque: 13 N.m (130 kgf.cm, 9 ft.lbf)
(o) Install the engine wire protector to the 2 brackets on the front side of the intake manifold.
(p) Install the engine wire protector to LH side of the intake manifold with the bolt.