Celica GT Liftback L4-2164cc 2.2L DOHC MFI (1998)
Generator: Service and Repair
Disassembly and Reassembly
DISASSEMBLY
1. REMOVE REAR END COVER
a. Remove the nut and terminal insulator.
b. M/T:
Remove the 3 nuts and end cover.
c. A/T:
Remove the bolt, 3 nuts, plate terminal and end cover.
d. Remove the wire clamp from the end cover.
2. M/T:
REMOVE BRUSH HOLDER AND VOLTAGE REGULATOR
a. Remove the 5 screws, brush holder and voltage regulator.