Celica GT Liftback L4-2164cc 2.2L DOHC MFI (1998)
Hold the starter clutch and rotate the pinion gear counterclockwise, and check that it turns freely. Try to rotate the pinion gear clockwise and check
that it locks.
If necessary, replace the clutch assembly.
14. IF NECESSARY, REPLACE CLUTCH ASSEMBLY
A.Disassembly of starter housing and clutch assembly
a. Mount a brass bar in a vise, and install the starter housing and clutch assembly to the brass bar.
b. Push down the pinion gear.
c. Using a plastic-faced hammer, tap down the stop collar.
d. Using a screwdriver, pry out the snap ring.
