Celica GT Liftback L4-2164cc 2.2L DOHC MFI (1998)
19. Remove oil seal.
Using the 09950 - 60010 (09951 - 00290), 09950-70010 (09951-07360) SST, press out the oil seal.
NOTICE: Be careful not to damage the rack housing.
INSPECTION
NOTICE: When using a vise, do not overtighten it.
1. Inspect the steering rack.
a. Using a dial indicator, check the rack for runout and for teeth wear and damage.
Maximum runout: 0.30 mm (0.0118 inch).
b. Check the back surface for wear and damage.
2. If necessary, replace the oil seal and the bearing.
a. Using the 09950 - 60010 (09951 - 00240), 09950-70010 (09951 -07100) Special Service Tool (SST), press out the oil seal and bearing from
the control valve housing.
b. Coat the new oil seal lip with power steering fluid.