Celica GT Liftback L4-2164cc 2.2L DOHC MFI (1998)
a. Pull the parking brake lever and install wheel stopper.
b. Start the engine and idle the engine.
c. Without depressing the clutch pedal, slowly shift the shift lever into reverse position until the gears contact.
d. Gradually depress the clutch pedal and measure the stroke distance from the point the gear noise stops (release point) up to the full stroke end
position.
Standard distance: 25 mm (0.98 inch) or more
If the distance is not as specified, do the following operation.
-
Check pedal height.
-
Check push rod play and pedal freeplay.
-
Bleed the clutch line.
-
Check the clutch cover and disc.
6. CHECK CLUTCH START SYSTEM
a. Check that the engine does not start when the clutch pedal is r6leased.
b. Check that the engine starts when the clutch pedal is fully depressed.
If necessary, replace the clutch start switch.
7. INSPECT CLUTCH START SWITCH CONTINUITY
Check the continuity between terminals when the switch is ON and OFF.
