Celica GT Liftback L4-2164cc 2.2L DOHC MFI (1998)
e. Using a press, remove the bearing.
f.
Using a snap ring expander, remove the snap ring.
g. Using a pin punch and hammer, remove the straight pin.
11. Remove the No.2 dust deflector.
a. Mount the outboard joint shaft in a soft jaw vise.
b. Using a screwdriver and hammer, remove the No.2 dust deflector.
NOTICE: Be careful not to damage the ABS speed sensor.
ASSEMBLY
1. Install new No.2 dust deflector.
Using SST 09309 - 36010, 09316 - 20011 and a press, install a new No.2 dust deflector.
NOTICE: Be careful not to damage the ABS speed sensor.
2. RH drive shaft:
Assemble the center drive shaft.
a. Using a pin punch and hammer, install the straight pin into the bearing case.
b. Using SST 09950 - 60010 (09951 - 00640), 09950 - 70010 (09951 -07150) and a press, install a new bearing into the bearing case.
c. Using a screwdriver, install a new snap ring.