toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Hydraulic Control Assembly - Antilock Brakes|Specifications|Page 4846 > < Hydraulic Control Assembly - Antilock Brakes|Specifications|Page 4844
Page 2
background image

(a) Remove the 2 bolts, nuts and ABS Actuator assembly.

Torque: 19 Nm (14 ft. lbs.)

(b) Remove the 3 nuts and ABS Actuator from the Actuator bracket assembly.

Torque: 5.4 Nm (48 inch lbs.)

(c) Remove the 3 holders and cushions from the ABS Actuator.

INSTALLATION

Installation is in the reverse order of removal.
-

After installation, fill brake reservoir with brake fluid, bleed brake system. See: Brake Bleeding/Service and Repair

-

Check for leaks.

Hydraulic Control Assembly - Antilock Brakes|Specifications|Page 4846 > < Hydraulic Control Assembly - Antilock Brakes|Specifications|Page 4844