Celica GT Ltd Ed Convertible L4-2164cc 2.2L DOHC MFI (1997)
Speed Sensor Installation Bolt
(b) Remove the Speed Sensor installation bolt from the Steering Knuckle.
Torque: 8 Nm (71 inch lbs.)
(c) Remove the clamp and Speed Sensor.
NOTE: Make sure that:
-
There are no foreign objects on the sensor or the part of the knuckle to which the sensor is to be installed.
-
The sensor is installed flat against the knuckle when you tighten the bolt.
INSTALLATION
Installation is in the reverse order of removal.
NOTE: After installation, check Speed Sensor signal.
