Celica GT Ltd Ed Convertible L4-2164cc 2.2L DOHC MFI (1997)
Brake Caliper: Service and Repair
Front
Removal and Installation
Front Brake Components
REMOVAL
Disconnect Flexible Hose From Caliper
1. Disconnect flexible hose.
(a) Remove the union bolt and gaskets from the Caliper, then disconnect the flexible hose from the Caliper.
Torque: 30 Nm (22 ft. lbs.)
NOTE: Install the flexible hose lock securely in the lock hole in the Caliper.
(b) Use a container to catch the brake fluid as it drains out.
2. Remove Caliper.
(a) Hold the sliding pin and loosen the 2 installation bolts.
Torque: 34 Nm (25 ft. lbs.)
(b) Remove the 2 installation bolts.
(c) Remove the Caliper from the torque plate.
3. Remove these parts: