Celica GT Ltd Ed Convertible L4-2164cc 2.2L DOHC MFI (1997)
(a)
Lightly press SST Radiator Service Tool Set # 09230 - 01010 or equivalent against the lock plate in the order shown in the illustration. After
repeating this a few times, fully caulk the lock plate by squeezing the handle until stopped by the stopper plate.
NOTE:
^
Do not stake the areas protruding around the pipes, brackets or tank ribs.
^
The points shown in the illustration and oil cooler near here (A/T) cannot be staked with the SST. Use pliers or similar object and be
careful not to damage the core plates.
(b) Check the lock plate height (H) after completing the caulking.
Plate height: 7.40 - 7.80 mm (0.2913 - 0.3071 inch)
If not within the specified height, adjust the stopper bolt of the handle again and caulk again.
