toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Oil Pick Up/Strainer > < Low Oil Pressure Warning Switch <--> [Oil Pressure Sender]|Testing and Inspection
Page 1
background image

Low Oil Pressure Warning Light: Testing and Inspection

INSPECT LOW OIL PRESSURE WARNING LIGHT

1. Disconnect the connector from the warning switch and ground terminal on the wire harness side connector.
2. Turn the ignition switch ON, check that the warning light lights up.

If the warning light does not light up, test the bulb or inspect wire harness.

Oil Pick Up/Strainer > < Low Oil Pressure Warning Switch <--> [Oil Pressure Sender]|Testing and Inspection