Celica GT Ltd Ed Convertible L4-2164cc 2.2L DOHC MFI (1997)
(a)
Install the plate stiffener with the 6 bolts.
Alternately tighten the bolts in several passes.
Torque:
12 mm head: 21 Nm (15 ft. lbs.)
14 mm head: 44 Nm (32 ft. lbs.)
(b) Install the intake manifold stay with the bolt and nut.
Torque:
Bolt: 21 Nm (15 ft. lbs.)
Nut: 44 Nm (32 ft. lbs.)
4. Install front Three-Way Catalytic Converter (TWC).
(a)
Place the cushion, retainer and a new gasket on the TWC.
(b) Install the TWC with the 3 bolts and 2 nuts.
Torque: 29 Nm (21 ft. lbs.)
(c)
Install the RH exhaust manifold stay with the 2 bolts and 2 new nuts.
Torque: 42 Nm (31 ft. lbs.)
(d) Connect the oxygen sensor (bank 1 sensor 2) connector.
5. Install engine mounting center member.