toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Timing Belt Tensioner > < Timing Belt Removal|Page 1565
Page 8
background image

(c)

Install the Power Steering (PS) reservoir bracket with the bolt and nut.
Torque: 28 Nm (21 ft. lbs.) for nut

(d) Install the PS reservoir to the reservoir bracket.

(e)

Tighten the 2 nuts and bolt holding the mounting insulator to the mounting bracket.
Torque:

Bolt: 37 Nm (27 ft. lbs.)
Nut: 52 Nm (38 ft. lbs.)

17. Connect ground strap connector.

18. Install PS pump drive belt.

Install the drive belt with the adjusting bolt and pivot bolt.

19. Install RH front wheel.
20. Install generator. Refer to Starting and Charging.
21. Install RH engine under cover.

Timing Belt Tensioner > < Timing Belt Removal|Page 1565