toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Control Assembly, HVAC|Testing and Inspection|Page 5681 > < Control Assembly, HVAC|Testing and Inspection|Page 5679
Page 3
background image

1. Connect the positive (+) lead from the battery to terminal A-19 and negative (-) lead to terminal A-18 and A-22.
2. Push in the DEF switch and then check that the DEF and A/C indicator light up.

If operation is not as specified, replace the A/C control assembly.

A/C INDICATOR

1. Connect the positive (+) lead from the battery to terminal A-19 and negative (-) lead to terminal A-18.
2. Push in the A/C button and then check that the A/C indicator lights up.

If operation is not as specified, replace the A/C control assembly.

3. Then. connect the positive (+) lead from the battery to terminal A-8 and negative (-) lead to terminal A-21 and check that the indicator dims.

If operation is not as specified, replace the A/C control assembly.

If continuity is not as specified, replace the A/C control assembly.

INSPECT BLOWER SPEED CONTROL SWITCH CONTINUITY

If continuity is not as specified, replace the switch.

Control Assembly, HVAC|Testing and Inspection|Page 5681 > < Control Assembly, HVAC|Testing and Inspection|Page 5679