toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Combination Switch|Diagrams|Page 7016 > < Combination Switch|Diagrams|Page 7014
Page 1
background image

Combination Switch: Adjustments

After inspecting the Combination Switch, adjust the Spiral Cable.

Center the spiral cable and then do the following.

1. Check that the front wheels are facing straight ahead.
2. Turn the cable counterclockwise by hand until it becomes harder to turn the cable.

3. Then rotate the cable clockwise about three turns to align the mark.

NOTE: The cable will rotate about three turns to either left or right of the center.

Combination Switch|Diagrams|Page 7016 > < Combination Switch|Diagrams|Page 7014