Celica GT Ltd Ed Convertible L4-2164cc 2.2L DOHC MFI (1997)
Timing Belt: Service and Repair
Timing Belt Installation
1. Install oil pump pulley.
(a)
Align the cutouts of the pulley and shaft, and slide on the pulley.
(b) Using Special Service Tool (SST) Variable Pin Wrench Set # 09960 - 10010 (Variable Pin Wrench Arm Assembly # 09962 - 01000, Pin 5 #
09963 - 00500) or equivalents, install the pulley nut.
Torque: 24 Nm (18 ft. lbs.)
2. Install crankshaft timing pulley.
(a)
Align the timing pulley set key with the key groove of the pulley.
(b) Slide on the timing pulley, facing the angle sensor inward.
CAUTION: Do not scratch the angle sensor of the timing pulley.
3. Install No. 2 idler pulley.
(a)
Install the pulley with the bolt.
Torque: 42 Nm (31 ft. lbs)
NOTE: Use the 35 mm (1.38 inch) long bolt.
(b) Check that the idler pulley moves smoothly.
4. Temporarily install No. 1 idler pulley and tension spring.
(a)
Align the bracket pin hole with the pivot pin.
