toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Idle Speed > < Pressure Specification|Page 1020
Page 2
background image

(o) Check that the fuel pressure remains as specified for 5 minutes after the engine has stopped.

Fuel pressure: 147 kPa
(1.5 kgf/sq.cm, 21 psi) or more
 

If pressure is not as specified, check the fuel pump, pressure regulator and/or injectors.

(p) After checking fuel pressure, disconnect the negative (-) terminal cable from the battery and carefully remove the SST to prevent gasoline from

splashing. SST 09268-45012

(q) Reconnect the fuel in let hose with 2 new gaskets and the union bolt.

Torque: 29 N.m (300 kgf.cm, 21 ft.lbf) 

(r) Reconnect the negative (-) terminal cable to the battery.
(s) Check for fuel leakage.

Idle Speed > < Pressure Specification|Page 1020