Celica GT Ltd Ed Convertible L4-2164cc 2.2L DOHC MFI (1997)
(c) Remove the pressure regulator from the delivery pipe.
(d) Install the O-ring to the fuel inlet of pressure regulator.
(e) Connect SST (hose) to the fuel inlet of the pressure regulator with SST (union) and the 2 bolts. SST 09268-41046 (09268-41091)
Torque: 5.4 N.m (55 kgf.cm, 48 ft.lbf)
(f) Connect the fuel return hose to the fuel outlet of the pressure regulator with SST (union), 2 gaskets and union bolt. SST 09268-41046
(09268-41081)
Torque: 19 N.m (195 kgf.cm, 14 ft.lbf)
(g) Install the grommet and O-ring to the injector.
(h) Connect SST (union and hose) to the injector, and hold the injector and union with SST (clamp). SST 09268-41046
(i) Put the injector into the graduated cylinder.
CAUTION: Install a suitable vinyl hose onto the injector to prevent gasoline from splashing out.
(j) Connect the TOYOTA hand-held tester to the DLC3.
(k) Connect the battery negative (-) cable to the battery.
(l) Turn the ignition switch ON and TOYOTA hand-held tester main switch ON.
