toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Component Tests and General Diagnostics|Page 3252 > < Component Tests and General Diagnostics|Page 3250
Page 3
background image

(e) Remove the bolt, and disconnect the engine wire protector from the LH side of the intake manifold.

(f) Disconnect the engine wire protector from the 2 brackets on the front side of the intake manifold.

(g) Remove the 2 bolts holding the delivery pipe to the cylinder head.

(h) Disconnect the delivery pipe from the 4 injectors.
(i) Pull out the 4 injectors.

NOTICE: Be careful not to drop the injectors.

(j) Remove the 4 insulators (Except California) and 2 spacers from the cylinder head.

Component Tests and General Diagnostics|Page 3252 > < Component Tests and General Diagnostics|Page 3250