Celica GT Ltd Ed Convertible L4-2164cc 2.2L DOHC MFI (1997)
HINT: The No.1 and No.3 injector connectors are brown, and the No.2 and No.4 injector connectors are gray.
(r) Connect the fuel inlet hose to the delivery pipe with 2 new gaskets and the union bolt.
Torque: 34 N.m (350 kgf.cm, 25 ft.lbf)
NOTICE: Be careful of the fuel inlet hose installation direction.
(s) Connect the air hose to the fuel pressure regulator.
(t) California only:
Install the air hose for the air assist system to the intake manifold port.
2. INSTALL CYLINDER HEAD COVER
(a) Install the cylinder head cover.
(b) Install the oil filler cap.
(c) Install the engine wire protector to the 2 mounting bolts of the No.2 timing belt cover in the sequence shown.
(d) Connect the PCV hose to the intake manifold.
(e) Install the cable bracket with the 2 bolts.
(f) Install the accelerator cable to the clamp on the intake manifold.
(g) Connect the 4 high-tension cords to the spark plugs.
(h) Install the 4 high-tension cords to the clamp on the cylinder head cover.
3. INSTALL THROTTLE BODY
4. CHECK FOR FUEL LEAKS
