Celica GT Ltd Ed Convertible L4-2164cc 2.2L DOHC MFI (1997)
(c) Remove the bolt and sensor.
CRANKSHAFT POSITION SENSOR INSTALLATION
1. INSTALL CRANKSHAFT POSITION SENSOR
(a) Install the sensor with the bolt.
Torque: 9.5 N.m (97 kgf.cm, 84 in.lbf)
(b) Install the sensor connector to the generator drive belt adjusting bar.
(c) Connect the sensor connector
2. INSTALL NO.1 TIMING BELT COVER
