Celica Liftback L4-107.5 1762cc 1.8L DOHC (7A-FE) (1995)
/Page-1440002.png)
3. Read the diagnostic trouble code on the CRUISE MAIN indicator light.
HINT: If the diagnostic trouble code is not output, inspect the diagnosis circuit. As an example, the blinking patterns for codes; normal, 11 and 21
are shown in the illustration.
4. Check for the problem using the diagnostic trouble code table on the next page.
5. After completing the check, disconnect terminals Tc and E1, and turn off the display.
Clearing Trouble Codes
Diagnostic Trouble Code Clearance
1. After completing repairs the diagnostic trouble code retained in memory can be cleared by removing the ECU-B fuse for 10 seconds or more, with
the ignition switch off.
2. Check that the normal code is displayed after connecting the fuse.
