Celica Liftback L4-107.5 1762cc 1.8L DOHC (7A-FE) (1995)
/Page-387008.png)
20. SEPARATE WATER PUMP AND NO.2 WATER INLET
WATER PUMP INSPECTION
INSPECT WATER PUMP
-
Turn the pulley and check that the water pump bearing moves smoothly and quietly.
WATER PUMP INSTALLATION
1. ASSEMBLE WATER PUMP AND NO.2 WATER INLET
2. INSTALL WATER PUMP AND NO.2 WATER INLET
(a) Place a new 0-ring in position on the cylinder block.
(b) Place a new gasket in position on the cylinder head so that the upper mark is toward the upper side.
