Celica Liftback L4-107.5 1762cc 1.8L DOHC (7A-FE) (1995)
/Page-387011.png)
(f) Install the engine wire harness and wiring harness protector with the 2 bolts.
(g) Connect the generator wire and clamp.
(h) Connect the 4 high-tension cords to the spark plugs.
7. INSTALL WATER PUMP PULLEY
(a) Carefully jack up the engine and temporarily install the water pump pulley with the 4 bolts.
(b) Install the 2 bolts holding the front engine mounting insulator to the engine mounting center member. Torque: 80 N.m (815 kgf.cm. 59 ft.lbf)
(c) Install the hole cover.
8. INSTALL PS DRIVE BELT ADJUSTING STRUT
