Celica Liftback L4-107.5 1762cc 1.8L DOHC (7A-FE) (1995)
/Page-330005.png)
-
Remove the screw and cord clamp.
-
Remove the distributor wire from the distributor housing.
7. REMOVE CONDENSER.
-
Remove the screw and condenser.
IIA INSPECTION
INSPECT SHAFT.
-
Turn the shaft and check that it is not rough or worn.
-
If it feels rough or worn, replace the distributor housing assembly.
IIA INSTALLATION
1. REMOVE RH ENGINE UNDER COVER.
2. SET NO.1 CYLINDER TO TDC/COMPRESSION.
