toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Air Bag(s) Arming and Disarming > < Bleeding the Brake System
Page 2
background image

3. Bleed brake line.

(a) Connect vinyl tube to Brake Caliper.
(b) Depress the brake pedal several times, then loosen the bleeder plug with the pedal held down.
(c) At the point when fluid stops comming out, tighten the bleeder plug, then release the Brake Pedal.
(d) Repeat (b) and (c) until all air in the fluid has been bled out. 
(e) Repeat the above procedure to bleed the air out of the brake line for each wheel.

4. Check fluid level in reservoir.

Check fluid level and add fluid if necessary.
Fluid: SAEJ17O3 or FMVSS No.116 DOT 3 

Air Bag(s) Arming and Disarming > < Bleeding the Brake System