Celica Liftback L4-107.5 1762cc 1.8L DOHC (7A-FE) (1995)
/Page-230004.png)
Assembly Notice:
^
Remove any old packing (FIPG) material.
^
Apply seal packing to the ignition coil installing surface of the housing.
(Seal packing: Part# 08826-00080 or equivalent)
5. REMOVE IGNITER.
-
Remove the 3 screws, and disconnect the 3 wires from the igniter terminals.
-
Remove the 2 screws and igniter.
6. REMOVE CORD CLAMP AND DISTRIBUTOR WIRE.
-
Disconnect the 2 connectors from the cord clamp.