Celica Liftback L4-107.5 1762cc 1.8L DOHC (7A-FE) (1995)
/Page-676002.png)
-
Using an ohmmeter, check that there is no continuity between the terminal and body.
-
If there is continuity, replace the sensor.
5. REINSTALL KNOCK SENSOR.
-
Using SST (09816-30010), install the knock sensor.
Torque: 44 Nm (33 ft.lb)
-
Connect the knock sensor connector.
6. RECONNECT NEGATIVE (-) TERMINAL CABLE TO BATTERY.
