Celica Liftback L4-107.5 1762cc 1.8L DOHC (7A-FE) (1995)
Fuel Injector: Service and Repair
Installation
OBSERVE THE FOLLOWING PRECAUTIONS WHEN REMOVING AND INSTALLING THE INJECTORS:
-
Never reuse the 0-ring.
-
When placing a new 0-ring on the injector, take care not to damage it in any way.
-
Coat a new 0-ring with spindle oil or gasoline before installing - never use engine, gear or brake oil.
1. INSTALL INJECTORS AND DELIVERY PIPE.
a. Install a new grommet to the injector.
b. Apply a light coat of gasoline to a new 0-ring and install it to the injector.
c. While turning the injector left and right, install it to the delivery pipe. Install the 4 injectors.
d. Position the injector connector upward.
e. Place 4 new insulators and the 2 spacers in position on the intake manifold.