Celica Liftback L4-107.5 1762cc 1.8L DOHC (7A-FE) (1995)
-
Using a jumper wire (or SST 09843-18020), connect terminals +B and FP of the DLC1.
-
Turn the ignition switch ON.
NOTICE: DO NOT start the engine.
-
Pinch the fuel return hose.
NOTICE: Always pinch the hose. Avoid bending as it may cause the hose to crack.
-
The pressure in the high pressure line will rise to approx. 392 kPa (4 kg/cm2, 57 psi).
-
In this state, check to see that there are no leaks from any part of the fuel system.
-
Turn the ignition switch to LOCK.
-
Remove the jumper from the DLC1.