Celica Liftback L4-107.5 1762cc 1.8L DOHC (7A-FE) (1995)
Fuel Tank: Service Precautions
Fuel System Safety Procedures
1. When disconnecting the high pressure fuel line, a large amount of gasoline will spill out, so observe these procedures:
-
Put a container under the connection.
-
Slowly loosen the connection.
-
Disconnect the connection.
-
Plug the connection with a rubber plug.
2. When connecting the flare nut or union bolt on the high pressure pipe union, observe these procedures:
Union Bolt Type:
-
Always use a new gasket.
-
Tighten the union bolt by hand.
-
Tighten the union bolt to the specified torque.
Torque: 30 Nm (300 kg.cm, 22 ft.lb)
Flare Nut Type:
-
Apply a light coat of engine oil to the flare and tighten the flare nut by hand.
-
Using SST, tighten the flare nut to the specified torque. (SST 09631-22020)
HINT: Use a torque wrench with a fulcrum length of 30 cm (11.81 in.).
Torque:
-
Fuel pump side: 24 Nm (240 kg.cm, 17 ft.lb)
-
Others: 30 Nm (310 kg.cm, 22 ft.lb)
3. Observe these precautions when removing and installing the injectors.