Celica Liftback L4-107.5 1762cc 1.8L DOHC (7A-FE) (1995)
/Page-899003.png)
-
Remove the dust cover.
-
Remove the gasket.
Assembly Hint: Use a new 0-ring.
4. REMOVE IGNITION COIL.
-
Remove the 2 nuts, and disconnect the 4 wires from the ignition coil terminals.
Assembly Notice:
^
When connecting the wires to the ignition coil, insert both properly into their grooves found on the side of the ignition coil.
^
Be sure the wires do not contact with signal rotor or distributor housing.
-
Remove the 4 screws and ignition coil.
