Celica Liftback L4-107.5 1762cc 1.8L DOHC (7A-FE) (1995)
/Page-540006.png)
-
Turn the crankshaft clockwise, and position the slit of the intake camshaft as shown in the illustration.
3. INSTALL IIA.
-
Install a new 0-ring to the distributor housing.
-
Apply a light coat of engine oil on the 0-ring.
-
Align the cutout portion of the coupling with the groove of the housing.
-
Insert the IIA, aligning the center of the flange with that of the bolt hole on the cylinder head.
-
Lightly tighten the 2 bolts.
4. CONNECT HIGH-TENSION CORDS TO SPARK PLUGS.
-
Connect the 4 high-tension cords to the spark plugs.
Firing order: 1 - 3 - 4 - 2
-
Install the high-tension cord clamp to the engine hanger.
5. CONNECT IIA CONNECTORS.
6. ADJUST IGNITION TIMING.
7. REINSTALL RH ENGINE UNDER COVER.
