Celica Liftback L4-107.5 1762cc 1.8L DOHC (7A-FE) (1995)
/Page-545011.png)
SST: 09248-55020 (09248-05011. 09248-05021)
D. Recheck valve clearance
6. INSTALL CYLINDER HEAD COVER
(a) Remove any old packing (FIPG) material.
(b) Apply seal packing to the cylinder head as shown in the illustration.
Seal packing: Part No.08826-00080 or equivalent
(c) Install the gasket to the cylinder head cover.
(d) Install the cylinder head cover with the four seal washers and cap nuts.
Torque. 5.9 N.m (60 kgf.cm, 52 in.lbf)
(e) Connect the PCV hoses to the cylinder head cover.
(f) Connect the four high-tension cords to the spark plugs.
(g) Install the engine wire harness and protector with the two bolts.
(h) Connect the following wires and clamps:
