Celica Liftback L4-107.5 1762cc 1.8L DOHC (7A-FE) (1995)
a.
Disconnect the solar sensor connector.
b.
Measure the resistance between terminals 1 and 2 of the solar sensor under the following conditions:
^
Cover the sensor with a cloth to avoid direct light.
^
Expose the sensor to light from a distance of 300 mm (11.81 in.) or less with an inspection light.
NOTE:
^
Terminal 1 of the sensor is always on the right, when the lock is facing up. When using an analog tester, connect the positive (+) lead to
terminal 2 and negative (-) lead to terminal 1 of the solar sensor.
HINT:
If the light is weak, the sensor may not react. Be sure to use an incandescent light for an inspection light.
Standard:
Procedure B:
a.
Disconnect the solar sensor connector.
b.
Measure the resistance between terminals 2 and 3 of the solar sensor under the following conditions:
^
Cover the sensor with a cloth to avoid direct light.