Celica Liftback L4-107.5 1762cc 1.8L DOHC (7A-FE) (1995)
Knock Sensor: Description and Operation
PURPOSE
The Knock Sensor senses engine detonation and reports to the engine control module (ECM). The sensor input is used to determine proper
ignition timing.
CONSTRUCTION
The sensor consists of a piezoelectric element tuned to resonate at the same frequency as engine knock (detonation).
OPERATION
When the engine knocks (detonates), the piezo element resonates at the same frequency and produces a voltage that varies according to the
amplitude of the knock. This signal is input to the ECM through the KNK pin.